Gasket Maker Red 70ml

Barcode:	12002
Stock Code:	50-SILICONE0317
In Stock:	1

0 reviews Write a review

R92.00

Qty

Downloads

Description
Reviews (0)

GLUEDEVIL RED GASKET MAKER is a fantastic RTV silicone rubber sealant, which can be used to replace felt, rubber, cork, paper and asbestos gaskets. Makes instant gaskets on valve covers, water pumps, oil pans, rear-end covers, thermostats, outlets, timing gear covers and whatever else needs a durable, watertight, leak-proof seal. It’s acetoxy-curing, permanently flexible and can withstand low and high temperatures ranging from -60°C to +300°C.

Application:

The surfaces for bonding must be dry, clean and free of loose particles.

Sealing of joints on heating flues, furnaces, reactors, plant pipes, housing gaskets, form-in-place gaskets, chimney construction, heaters and installation of ovens.

Properties / Technical Data:

Red

Elastic one-component silicone sealant.

Acetoxy-curing system. Reacts with air humidity at room temperature.

Density 1.11g.cm

Shore A (DIN 53 505) 33

Elasticity modulus at 100% 0.7N.mm (DIN 53 504)

Tensile strength 2.6N.mm (DIN 53 504)

Elongation at break 450% (DIN 53 504)

Maximum total deformation 20%

Heat resistance: Constant Load up to +250°C

Short Term up to +300°C

Skin formation 10 Min

Full hardening 2mm per day

Specifications:

Not suitable for cylinder head gaskets or for parts permanently exposed to fuel.

This product should not be used to replace composite head gaskets, specifically where tolerances are predetermined and are critical to engine performance.

This product releases acetic acid during the curing process, therefore it’s not suitable to use on alkaline surfaces such as fibrous cement, concrete, asbestos, plaster or to come in contact with the following surfaces like marble, granite or any other natural stone as it may cause discolouration on the surfaces. It should also not be used at the back of mirrors as it will de-silver the mirror-backing.

It is advisable to wear gloves whilst applying this silicone as it contains acetic acid which can irritate the skin and eyes.

Not suitable for certain plastics such as polypropylene, polyethylene or Teflon.

Not paintable.

This silicone is unsuitable for fish-tanks.